Powered Slip Handler

The JJC Powered Slip Handler is hydraulic powered, electronically controlled, automatic slip handler. It is compact yet versatile. It may compensate for drill pipe deviation, provides stable downward pressure, and is very reliable. It may be integrated into all drilling systems to realize automatic operation.

Efficiency

The hydraulic power slip system can be quickly installed and released at the wellhead by means of electronically controlled hydraulic drive; they can be operated by the integrated control system of the drilling rig to realize safe and efficient wellhead automation.

Higher Reliability

Reinforced structure and strengthened transmission system, high-strength tong jaw and spinning chain, service life prolonged by 50%.

Safe

The patented design automatically compensates and adapts to the wellhead deviation of the drilling tool, maintains a stable downforce after the operation, and has a high operation success rate; it can provide reliable signal feedback for the operation, and the operation safety is higher.

Flexible Control

Provide local, remote control, driller and integrated control options, which not only can be used at the wellhead of the drilling rig to reduce the labor intensity of personnel, but also meet the needs of new automated drilling rigs and old drilling rigs.

Convenient

The hydraulic power slip system has a compact structure, small size and light weight, and is very convenient to install at the wellhead. Compared with other hydraulic slips and pneumatic slips, the maintenance cost is lower and the reliability is higher.

Avoid Wellhead Interference

When in standby, the slip completely avoids the wellhead, completely avoids the collision and damage between the slips and the drilling tools, and at the same time adapt to a variety of operating conditions, without frequent disassembly, reducing the labor intensity of personnel.

TECHNICAL SPECIFICATIONS
	SE35-A1	SE5O-A1
	2-7/8"~9-3/4"	2-7/8"~9-3/4”
Max.Load Rating	3,150 kN	4,500 kN
Hydranlic Pressure	16 MPa (2,300 psi)	16 MPa (2,300 psi)
Max. Open Torque	1,600 N.m	1,600 N.m
Max.Unlock Torque	1,400 N.m	1,400 N.m
TD Oil Passages Used	2	2
Controls	Auto Close, Remote Open and Interlock	Auto Close, Remote Open and Interlock
Dimensions (L×WxH)	1,070mm x 500 mm x 470 mm	1,1 30mm x 780mm x 550mm
Product Spec. Level	PSL1	PSL1

Products

Inventory List

Top Drive
lron Roughneck
Mud Pump
Drawworks
Pipe Racker
BOP
HPU
IBOP
Elevator
Electrical
Catwalk
Finger Board

Solution

Support

Contact

1101 Tower A, 15 Ronghua South

Rd,Beijing 100176, China

FAX: +86 10 6786 6409

TEL: +86 188 1046 1537

EMAIL:sales@jjcpe.com